D-Link 1226G User Manual - Page 12

Login, Setup Menu - web smart des

Get D-Link 1226G - DES Switch PDF manuals and user guides
UPC - 790069264221
View all D-Link 1226G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Configuring the Switch The DES-1226G has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web browser. A network administrator can manage, control, and monitor the Switch from the local LAN. This section indicates how to configure the Switch to enable its smart functions including: Port Setting (Speed/Disable, Duplex mode, Flow Control, and Port base QoS) Virtual LAN Group setting (VLAN) Trunking Port Mirroring System Setting Device status Login Before you configure this device, note that when the Web-Smart Switch is configured through an Ethernet connection, the manager PC must be set on same the IP network. For example, when the default network address of the default IP address of the Web Smart Switch is 192.168.0.1, then the manager PC should be set at 192.168.0.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0. Open an Internet Explorer 5.0 or above Web browser. Enter the IP address http://192.168.0.1 (the factory-default IP address setting) in the address location. Figure 7. Through the Web Management Utility, you do not need to remember the IP Address; select the device shown in the Monitor List of the Web Management Utility to settle the device on the Web browser. When the following dialog page appears, enter the default password "admin" and press Login to enter the main configuration window. Figure 8. After entering the password, the main page appears and the screen will display the device status. Figure 9. Device Status Setup Menu When the main page appears, find the Setup menu in the left side of the screen (Figure 15). Click on the setup item that you want to configure. There are eleven options: Port Settings, VLAN Settings, Trunk Setting, Mirror Setting, Device Status, Statistic, System Settings, Trap Setting, Password Setting, Backup Setting, and Reset Setting as shown in the Main Menu screen. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
Configuring the Switch
The DES-1226G has a Web GUI interface for smart switch configuration. The Switch can be configured through the Web browser. A network
administrator can manage, control, and monitor the Switch from the local LAN. This section indicates how to configure the Switch to enable its smart
functions including:
²
Port Setting (Speed/Disable, Duplex mode, Flow Control, and Port base QoS)
²
Virtual LAN Group setting (VLAN)
²
Trunking
²
Port Mirroring
²
System Setting
²
Device status
Login
Before you configure this device, note that when the Web-Smart Switch is configured through an Ethernet connection, the manager PC must be set
on same the
IP network
. For example, when the default network address of the default IP address of the Web Smart Switch is
192.168.0.1
, then the
manager PC should be set at 192.168.0.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0.
Open an Internet Explorer 5.0 or above Web browser.
Enter the IP address
(the factory-default IP address setting) in the address location.
Figure 7.
Through the Web Management Utility, you do not need to remember the IP Address; select the device shown in the Monitor List of the Web
Management Utility to settle the device on the Web browser.
When the following dialog page appears, enter the default password
"admin"
and press Login to enter the main configuration window.
Figure 8.
After entering the password, the main page appears and the screen will display the device status.
Figure 9. Device Status
Setup Menu
When the main page appears, find the
Setup menu
in the left side of the screen (Figure 15). Click on the setup item that you want to configure. There
are eleven options:
Port Settings, VLAN Settings, Trunk Setting, Mirror Setting, Device Status, Statistic, System Settings, Trap Setting, Password
Setting, Backup Setting, and Reset Setting
as shown in the Main Menu screen.
12