D-Link 1226G User Manual - Page 16
Device Status, System Setting, Trap Setting - login
![]() |
UPC - 790069264221
View all D-Link 1226G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Figure 16. Device Status Click on the "Status" to present the device status on this screen. It will display the System Status, Port Status, VLAN Status, Trunk Status, and Mirror Status. Press "Refresh" when you need to renew the posted information. System Setting The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask, and Gateway. Through the Web Management Utility, you can easily recognize the device by using the System Name and the Location Name. The Login Timeout is to set the idle time-out for security issues. When there is no action when running the Web Smart Utility, and it times out, you must re-login to Web Smart Utility before you set the Utility. Fill up the IP Address, Subnet Mask, and Gateway for the device. Figure 17. Trap Setting The Trap Setting enables the device to monitor the Trap through the Web Management Utility and set the Trap IP Address of the manager where the trap is to be sent. Figure 18. Trap Setting System Events: Monitoring the system's trap. Device Bootup: A trap when booting up the system. Illegal Login: A trap when an incorrect password is used to login. It will record the IP address that attempted to login. 16
![](/manual_guide/products/dlink-1226g-user-manual-c34675a/16.png)