D-Link 1226G User Manual - Page 6

100Mbps On When the LED light is on, the respective port is connected to a 100Mbps Ethernet network. Off When the LED light is off, the respective port is connected to a 10Mbps Ethernet network, or no link. Ports 25 & 26 Status LEDs Link/Act On When the LED lights on, the respective port is connected to a 10/100/1000Mbps Ethernet network. Blinking When the LED is blinking, the respective port is transferring or receiving data on a 10/100/1000Mbps Ethernet network. Off No link. 1000Mbps On When the LED lights on, the respective port is connected to a Gigabit Ethernet network. Off The respective port is connected to a 10/100Mbps Ethernet network, or no link. 100Mbps On When the LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network. Off When the LED light is off, the respective port is connected to a 10Mbps or Gigabit Ethernet network or there is no link. Option Ports 25~26 SFP(Mini GBIC) Status LEDs Link/Act On : When the SFP(Mini GBIC) module is installed and connected to a network, the Link/ACT LED lights on. Blinking : When the LED is blinking, the SFP(Mini GBIC) module is receiving data on a network. Off : No link. 1000Mbps On : When the 1000Mbps LED lights on, the respective port is connected to a 1000Mbps Gigabit Ethernet network. Off : When the respective port is disconnected to the network. Connections Front Panel 10/100 Base-TX Twisted-Pair Ports SFP(Mini GBIC) Ports LED Indicators 10/100/1000Base-T Twisted-Pair Ports 10/100BASE-TX Twisted-Pair Ports (Port1~24) These ports support network speeds of either 10Mbps or 100Mbps, and can operate in half- and full- duplex transfer modes. These ports also support automatic MDI/MDI-X crossover detection, giving true "plug and play" capability. Just plug the network cable directly into the hub; you can use either straight-through or crossover cable. 6