D-Link DAP-1360 Product Manual - Page 43

Wireless Channel - d link repeater setup

Get D-Link DAP-1360 PDF manuals and user guides
UPC - 790069323003
View all D-Link DAP-1360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Section 3 - Configuration Repeater Mode Enable Wireless: Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the drop-down menu or click Add New to create a new schedule. Wireless Mode: Select Repeater from the drop-down menu. Site Survey: Click Site Sur vey to display a list of wireless networks in your area. You may select the wireless access point to connect to. Wireless Network Enter the SSID of the access point you want to repeat Name: the signal of. If you do not know for sure, click Site Survey and select it from the list, if available. Wireless Channel: The channel will automatically change to the channel of the AP you are connected to. 802.11 Mode: Select the appropriate 802.11 mode based on the wireless clients in your network. The drop-down menu options are 802.11g Only, Mixed 802.11b/g, 802.11b Only, 802.11n Only, or Mixed 802.11b/g/n. Channel Width: Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu. Transmission Rate: Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance. Enable Hidden Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by Wireless: site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual Mode: for a detailed explanation of the wireless security options. WPS: Select enable if you want to configure the DAP-1360 with Wi-Fi Protection setup. D-Link DAP-1360 User Manual 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
43
D-Link DAP-1360 User Manual
Section 3 - Configuration
Enable Wireless:
Wireless Mode:
Site Survey:
Wireless Network
Name:
Wireless Channel:
802.11 Mode:
Channel Width:
Transmission Rate:
Enable Hidden
Wireless:
Wireless Security
Mode:
WPS:
Check the box to enable the wireless function. If
you do not want to use wireless, uncheck the box to
disable all the wireless functions. You may also set up
a specific time range (schedule). Select a schedule
from the drop-down menu or click Add New to create
a new schedule.
Select Repeater from the drop-down menu.
Click Site Survey to display a list of wireless
networks in your area. You may select the wireless
access point to connect to.
Enter the SSID of the access point you want to repeat
the signal of. If you do not know for sure, click Site
Survey and select it from the list, if available.
The channel will automatically change to the channel
of the AP you are connected to.
Select the appropriate 802.11 mode based on the
wireless clients in your network. The drop-down menu
options are 802.11g Only,
Mixed 802.11b/g
, 802.11b
Only, 802.11n Only, or
Mixed 802.11b/g/n
.
Select the appropriate channel width between 20MHz or Auto 20/40MHz from the drop-down menu.
Select the transmission rate. It is strongly suggested to use the Auto setting for optimal performance.
Check the box if you do not want the SSID to be broadcast by the DAP-1360. This prevents the SSID from being seen by
site survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1360 in order to connect
to it.
Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual
for a detailed explanation of the wireless security options.
Select enable if you want to configure the DAP-1360 with Wi-Fi Protection setup.
Repeater Mode