D-Link DCS-1110 Product Manual - Page 37
camera must be opened on your router
UPC - 790069292750
View all D-Link DCS-1110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Section 3 - Configuration Web Port: This is the port that allows the user to connect to the camera's user interface. By default the port is set to 80. You may change the port number if using multiple cameras. Port Note: If your wish to enable remote viewing of your camera, you MUST also set up your router/gateway for Port Mapping. Please refer to your router's instruction manual on how to open up ports. For additional help on configuring your camera to work with your router, please refer to the next section on setting up your camera for use with a router. For installing multiple cameras, ONE port per camera must be opened on your router, the Web server (HTTP) port. AV Control This is the port that allows the user to Port: connect to the camera and synchronize the audio and video. By default the port is set to 5000. You may change the port number if using multiple cameras. AV Streaming This is the port used to stream video. By default the port is set to 5001. You may change the port number Port: if using multiple cameras. D-Link DCS-1110 User Manual 37