D-Link DCS-3220G Product Manual - Page 30
Open Virtual Server Ports to Enable Remote Image Viewing, DCS-3220G, Virtual Server, Advanced
UPC - 790069269523
View all D-Link DCS-3220G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using & Configuring the DCS-3220G with a NAT Router (continued) http://192.168.0.1 Your WAN IP Address will be listed here. Determine Your Router's IP Address (WAN) Note: Because a dynamic WAN IP can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location. The Static IP Address will also allow you to access your camera attached to your router over the Internet Open Virtual Server Ports to Enable Remote Image Viewing The firewall security features built into the DI-614+ router prevent users from accessing the video from the DCS-3220G over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the DCS-3220G are blocked from access over the Internet. Therefore, these ports need to be made accessible over the Internet. This is accomplished using the Virtual Server function on the DI-614+ router. The Virtual Server ports used by the camera must be opened through the router for remote access to your camera. Virtual Server is accessed by clicking on the Advanced tab of the router screen. 30