D-Link DCS-3220G Product Manual - Page 38
Configuration > Advanced > Network, General Settings, Reset IP Address at next boot, IP address - default ip
UPC - 790069269523
View all D-Link DCS-3220G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Using the DCS-3220G with an Internet browser (continued) Configuration > Advanced > Network Reset IP Address at next boot Once the DCS-3220G is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run IP Installer to find the camera's IP address. General Settings IP address Subnet mask - Default router - Primary DNS Secondary DNS - HTTP Settings HTTP Port- Necessary for network identification. Used to determine if the destination is in the same subnet. The default value is "255.255.255.0." The router used to forward frames to destinations in a different subnet. Invalid router settings may cause the failure of transmissions to a different subnet. Primary domain name server that translates names to IP addresses. Secondary domain name server to backup the primary one. Can be set to other than the default port 80. When the administrator changes the HTTP port of the DCS-3220G (which has an IP address of 192.168.0.100) from 80 to 8080, users must type http://192.168.0.100:8080 in the Web browser bar. 38