D-Link DCS-3220G Product Manual - Page 8
Hardware Installation - wireless internet camera
UPC - 790069269523
View all D-Link DCS-3220G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Hardware Installation Connect to a Network If you are connecting the DCS-3220G to a wired Ethernet network, connect an Ethernet cable to the network cable connector located on the Internet Camera's back panel and attach it to the network. If you are connecting the DCS-3220G to a 802.11g wireless Ethernet network, attach the two wireless antennas to the antenna connectors on the back panel of the DCS-3220G. Attach the external power supply Attach the external power supply to the DC power input connector located on the Internet Camera's back panel (labeled 12VDC) and connect it to your wall outlet. When you have a proper connection, the LED will turn from red to green. The light may cycle on and off and your computer may show an intermittent loss of connectivity, this is normal until you have configured your Internet Camera. Attaching the Internet Camera to the Camera Stand The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet Camera bottom socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There are holes located in the base of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any wall securely. 8