D-Link DES-3624 Product Manual - Page 70
Con Port-based VLAN Entry, Management Vlan ID
UPC - 790069221736
View all D-Link DES-3624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Stackable NWay Ethernet Switch User's Guide ♦ Action Select the desired action by toggling between Add and Remove. ♦ MAC Address The MAC address of the broadcast domain member being added or removed. Please note that the Status field for the MAC address you have entered may read Not-Apply. Once the Switch is restarted in MAC-based broadcast domain mode, the MAC-addresses will be applied, meaning that the broadcast domain is active. Current Broadcast Domain, Number of members, MAC Address (in the lower part of the screen), and Status reflect the current conditions. They are read-only fields and cannot be changed. Configure Port-based VLANs Choose Configure Port-based VLANs on the VLAN Configuration screen (System Configuration Æ Configure VLANs & MAC-based Broadcast Domains) to access the Port-based VLAN Configuration menu pictured below (note that if you have just changed to this mode, you must also reboot the Switch before being able to work with port-based VLANs): Figure 6-33. Port-based VLAN Configuration menu The field you can set is: ♦ Management Vlan ID Enter a VLAN ID (VID) from 1 to 12 for use with management packets. Select Configure Port-based VLAN Entry at the bottom of the menu above to access the following screen: 74 Using the Console Interface