D-Link DES-3624 Product Manual - Page 9
Performance features, Management, Supports IGMP Multicast snooping. - how to configure des
UPC - 790069221736
View all D-Link DES-3624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Stackable NWay Ethernet Switch User's Guide ♦ Gigabit uplink/MDI-II (media dependent interface) slide-in module in the rear panel for uplink to another Switch. One-port or two-port models are available (DES-3624i, DES-3624iF, and DES-3624iFM only). ♦ RS-232 DCE console port for diagnosing the Switch via a connection to a PC and Console/Out-of-band management (DES-3624i, DES-3624iF, or DES-3624iFM only). ♦ One slide-in module interface in the front panel for 1 or 2 ports 10/100M Ethernet connection. Three optional modules are available: 2-port TX, 2-port FX (MT-RJ), and 1-port FX (SC). ♦ Stacking Input/Output port slide-in module in the rear panel for stacking to another device to implement a high-port count, manageable switch. Three-port module for master device and one-port module for a client device. Performance features ♦ Store and forward switching scheme capability to support rate adaptation and protocol conversion. ♦ Full- and half-duplex for 10Mbps and 100Mbps connections. The optional 1000BASE-SX and 1000BASE-LX modules operate at full-duplex only. The optional 1000BASE-T module, however, can be negotiated to 1000M/half. ♦ Auto polarity detection and correction of incorrect polarity on the receive twisted pair at each port. ♦ Data forwarding rate 14,880 pps per port at 100% of wire-speed for 10Mbps speed. ♦ Data forwarding rate 144,810 pps per port at 100% of wire-speed for 100Mbps speed. ♦ Data forwarding rate 1,488,100 pps per port at 100% of wire-speed for 1000Mbps speed. ♦ Data filtering rate eliminates all error packets, runts, etc. at 14,880 pps per port at 100% of wire-speed for 10Mbps speed. ♦ Data filtering rate eliminates all error packets, runts, etc. at 144,810 pps per port at 100% of wirespeed for 100Mbps speed. ♦ Data filtering rate eliminates all error packets, runts, etc. at 1,488,100 pps per port at 100% of wirespeed for 1000Mbps speed. ♦ 12K active MAC address entry table per device with automatic learning and aging (10 to 9999 seconds). ♦ 12 MB packet buffer per device. ♦ Supports Broadcast Storm filtering. ♦ Supports IGMP Multicast snooping. Management ♦ RS-232 console port for out-of-band network management via a console terminal or PC. ♦ Spanning Tree Algorithm Protocol for creation of alternative backup paths and prevention of indefinite network loops. ♦ Fully configurable either in-band or out-of-band control via SNMP based software. Introduction 13