D-Link DES-3624 Product Manual - Page 84

Save Settings to TFTP Server, Destination IP Address, No. of Pings, Ping Test, Utilities

Page 84 highlights

Stackable NWay Ethernet Switch User's Guide Figure 6-48. Ping Test screen After filling in the fields above, press START to initiate the Ping test. The fields you can set are: ♦ Destination IP Address The IP address of the device to be Pinged. ♦ No. of Pings Amount of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will continue Pinging indefinitely. In the lower part of the Ping Test screen, you can view the Result of the ping test. Save Settings to TFTP Server Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main menu) to access the following screen: 88 Using the Console Interface

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175

Stackable NWay Ethernet Switch User’s Guide
88
Using the Console Interface
Figure 6-48.
Ping Test screen
After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
Destination IP Address
The IP address of the device to be Pinged.
No. of Pings
Amount of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will
continue Pinging indefinitely.
In the lower part of the
Ping Test
screen, you can view the Result of the ping test.
Save Settings to TFTP Server
Choose
Save Settings to TFTP Server
from the
Utilities
menu (under
System Utilities
on the main
menu) to access the following screen: