D-Link DFE-650TX Product Manual - Page 20

DFE-650 Series Fast Ethernet PC Card User's Guide Installing 16-bit NetWare Client for DOS Installation Director includes a Quick Install option for the DFE650 support software required for interoperation with the 16-bit NetWare Client for DOS. The screen text, status line guide text, and helptext of Installation Director will assist you through the Quick Install procedure. Installing NetWare Client32 for DOS Installation of the 32-bit support software for the DFE-650 can only be accomplished as part of a new installation, or a re-installation of the Client32 software on your notebook PC workstation. The NetWare Client32 software includes a DOS-based installer program, INSTALL.EXE, which is used for the original installation, and for any necessary re-installation, of the Client32 software on your station. Thus INSTALL.EXE is also the installation program for the DFE-650 support software required for interoperation with NetWare Client32 for DOS. Before you can proceed with any of the steps which follow, it will be necessary for you to find a source for the NetWare Client32 software. Depending on decisions which have been made by the NetWare administrator for your LAN, the Client32 software may be available from a NetWare server on the LAN or, alternatively, it may be necessary for you to install from the Client32 CD-ROM or diskettes. If you are in doubt as to the proper source for the Client32 software, please consult your NetWare administrator. Irrespective which form your source takes, you will need to identify the directory which holds the Client32 for DOS software. If your source for the Client32 software is the Novell NetWare 4.11 CDROM, then the appropriate directory will be (assuming that the CDROM drive is E:), E:\PRODUCTS\DOSWIN32\IBM_6 18 Software Installation