D-Link DFE-650TX Product Manual - Page 25

DFE-650 Series Fast Ethernet PC Card User's Guide LOAD C:\...\DFE650.LAN SLOT=1 FRAME=... When you have completed the edit for each such line in STARTNET.BAT, then save STARTNET.BAT and exit from Edit. If you are uncertain whether the DFE-650 occupies Slot 1 or Slot 2, and you have entered the wrong slot number, then when you restart the notebook PC, there will be a diagnostic which advises that "the PC Card is not present" and there will be no network connection. If you do not get a network connection upon your restart, then rework your editing of STARTNET.BAT, entering the alternate PC Card Slot Number (substitute SLOT=2 in each place where you have added SLOT=1). Restart the notebook PC. Excepting the possibility that the wrong PC Card Slot Number is indicated in STARTNET.BAT, you should get a NetWare login upon this restart. Expanded Installation Instructions: Windows 3.1 Platform in NetWare Network If your notebook PC station is running Windows 3.1, then you need to install Client32 for DOS. (Fundamentally, the DFE-650 support software modules to be installed are the same under Windows 3.1 and DOS. But the Windows 3.1-based installer program SETUP.EXE does produce a different result from the installation made by the DOS-based installer, INSTALL.EXE.) Installing NetWare Client32 for DOS (under Windows 3.1) Installation of the support software for the DFE-650 can only be accomplished as part of a new installation, or a re-installation of the Client32 software on your notebook PC. The NetWare Client32 software includes a Windows-based installer program, SETUP.EXE which is used for the original installation, and for any necessary reinstallation, of NetWare Client32 for DOS on your station.. Thus Software Installation 23