D-Link DFE-650TX Product Manual - Page 28
Other Boards, A:\NETWARE\32BITLAN\DFE650.LAN, DFE-650 Fast Ethernet, PC Card Driver, Driver Settings
![]() |
View all D-Link DFE-650TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
DFE-650 Series Fast Ethernet PC Card User's Guide ODI Driver Selection Screen Disregard the "Board" textbox at the top of this dialog box. In the "Driver" section below the textbox, select the 32 bit option button, then choose the Other Boards button. This brings up the ODI Driver Path dialog box. The ODI Driver Path dialog box features a textbox for specification of the full path filename to the ODI driver (Open Data Interface driver module) needed for operation of the DFE-650 under DOS or Windows 3.1 OS. That module is supplied on the D-Link DFE-650 Series Fast Ethernet PC Card Driver diskette. Insert the D-Link DFE-650 Series Fast Ethernet PC Card Driver diskette into a diskette drive of your notebook PC (here assumed to be drive A), and type in the textbox to complete the following entry: A:\NETWARE\32BITLAN\DFE650.LAN Then choose the OK button to close the ODI Driver Path dialog box. In the Select a Board dialog box which then appears, there will be just one entry: D-Link DFE-650 Fast Ethernet PC Card Driver. Click that entry to confirm that you are installing the DFE-650, then choose the OK button to close the Select a Board dialog box. This returns control to the ODI Driver Selection dialog box. Now choose the Driver Settings button. The Driver Settings dialog box appears. Driver Settings Screen This screen provides control of four settings. The Connection Type setting is an aggregate setting which includes Line Speed (10Mbps or 100Mbps) and Duplex (Half Duplex or Full Duplex). It is recommended that you deselect all line speed and duplex settings, by celecting " none" as Connection Type. 26 Software Installation
![](/manual_guide/products/dlink-dfe650tx-product-manual-0db5d6b/28.png)