D-Link DFE-650TX Product Manual - Page 26

DFE-650 Series Fast Ethernet PC Card User's Guide the NetWare SETUP.EXE program is also the installation program for the DFE-650 software. Before you can proceed with any of the steps which follow, it will be necessary for you to have a source for the NetWare client software. Depending on decisions which have been made by the NetWare administrator for your LAN, the NetWare client software may be available from a NetWare server on the LAN, or it may be necessary for you to install from the Novell NetWare CD-ROM or diskettes. If you are in doubt as to the proper source for your NetWare client software, then please consult your NetWare administrator. Irrespective which form your source takes, you will need to identify the directory which holds the NetWare Client32 for DOS software. If your source for NetWare Client32 for DOS is the NetWare 4.11 CD-ROM, then the appropriate directory will be (assuming that the CD-ROM drive is E:), E:\PRODUCTS\DOSWIN32\IBM_6 In Program Manager, choose RUN under the FILE menu, then, in the RUN dialog box, choose the Browse button. Select the drive which holds the software source, then navigate to the appropriate directory. Double-click SETUP.EXE to initiate the installation run. The initial screen in the SETUP.EXE run is only for the purpose of selecting the language in which the screen instructions which will appear during the rest of the SETUP.EXE run. Choose the OK button for English, or select another one of the languages offered, and then choose the OK button. The NetWare Client 32 Welcome screen then appears. NetWare Client 32 Welcome Screen The Welcome screen provides some orientation information, and offers you the choice of reading additional technical information in the README file before going ahead with installation. It might be 24 Software Installation