D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 149

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Clone From Port - To Port Description Select this option to enable the clone feature. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Trunk Promiscuous was selected as the VLAN Mode, the following page will appear. Figure 5-27 VLAN Interface (Trunk Promiscuous) Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking Native VLAN VID Action Allowed VLAN Range Clone From Port - To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, Trunk, 802.1Q-Tunnel, Promiscuous, Host, Trunk Promiscuous, and Trunk Secondary. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. After selecting Trunk Promiscuous as the VLAN Mode the following parameter will be available. Select to enable or disable the ingress checking function. Tick this option to enable the native VLAN function. Also select if this VLAN supports Untagged or Tagged frames. After ticking the Native VLAN option the following parameter will be available. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Select the action that will be taken here. Options to choose from are All, Add, Remove, Except, and Replace. Enter the allowed VLAN range here. Select this option to enable the clone feature. Select the range of ports that will be used in the clone feature here. Click the Apply button to accept the changes made. Click the Back button to discard the changes made and return to the previous page. When Trunk Secondary was selected as the VLAN Mode, the following page will appear. 137