D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 298

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Description interface does not receive the report packet before the leave timer expires, then the interface's membership will be removed from the group or channel that it is leaving. The value of the leave timer is the value of the Last Listener Query Interval times the Last Listener Query Count. The range is from 1 to 25 seconds. Select the Default option to use the default value, which is 1 seconds. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. MLD Group Table This window is used to find and display the MLD group information. To view the following window, click L3 Features > IP Multicast Routing Protocol > MLD > MLD Group Table, as shown below: Figure 6-103 MLD Group Table Window The fields that can be configured are described below: Parameter Interface VLAN Group Description Enter the VLAN interface ID here. The range is from 1 to 4094. Enter the group IPv6 address here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. MLD SSM Mapping Settings This window is used to display and configure the MLD Source Specific Multicast (SSM) mapping settings. To view the following window, click L3 Features > IP Multicast Routing Protocol > MLD > MLD SSM Mapping Settings, as shown below: 286