D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 400

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 6-238 Route Map (Set Clauses, Edit) Window The fields that can be configured are described below: Parameter Action IP Default Next Hop IP Next Hop Description Select Add to add a new entry based in the information entered. Select Delete to delete an entry based in the information entered. Enter the default next-hop IP addresses in the spaces provided that will be used to route the packet. This feature can be used to specify multiple default next hop routers. If default next hops are already configured, the default next hops configured later will be added to the default next hop list. When the first default next hop router specified is down, the next default next hop router specified is tried in turn to route the packet. Up to 8 default next-hop IP addresses can be entered. Select the IP next hop type here. This feature is used to configure the next-hop router to route the packet that passes the match clauses of the configured route map sequence. Options to choose from are IP Address, Peer Address, and Recursive. • IP Address - Specifies the IP addresses of the next-hops to route the packet. Enter the next-hop IP addresses in the spaces provided here. Up to 8 next-hop IP addresses can be entered. • Peer Address - Specifies the BGP peer address as the next-hop. • Recursive - Specifies the IP address of the recursive as the next-hop router. Enter the recursive next-hop IP address in the space provided here. IPv6 Next Hop Select the IPv6 next hop type here. This feature is used to configure the next-hop router to route the packet that passes the match clauses of the configured route map sequence. Options to choose from are: • IP Address - Specifies the IPv6 addresses of the next-hops to route the packet. Enter the next-hop IPv6 addresses in the space provided here. Community Select the community option here that will be used in the set match rule. Options to choose from are: 388