D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 96
DNS, DNS Global Settings
![]() |
View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide When the Switch uses Option 66 to get the TFTP server name, it resolves Option 6 first to get the DNS server IP address. If the Switch fails to connect to the DNS server or Option 6 does not exist in the response message, the Switch will try to connect the DNS server already configured in the system manually. Option 67 is used to identify the bootfile when the 'file' field in the DHCP header has been used for DHCP options. This can only be used in the DHCP auto-configuration mode and not the DHCP auto-image mode. For more information refer to RFC 2132. When specifying the image file name, the DHCP Option 125 (RFC 3925) must be used. The Switch needs to check the enterprise-number1 field. If the value is not the D-Link vendor ID (171), the Switch will stop the process. If the Option contains more than one field, only the first entry enterprise-number1 will be used. To view the following window, click Management > DHCP Auto Image Settings, as shown below: Figure 4-65 DHCP Auto Image Settings Window The fields that can be configured are described below: Parameter DHCP Auto Image State DHCP Auto Image Timeout Description Select to enable or disable the DHCP auto-image feature here. Enter the timeout value of the DHCP auto-image feature here. The range is from 1 to 65535 seconds. Click the Apply button to accept the changes made. DNS The Domain Name System (DNS) is used to map human-readable domain names to the IP addresses used by computers to communicate. A DNS server performs name-to-address translation, and may need to contact several name servers to translate a domain to an address. The address of the machine that supplies domain name service is often supplied by a DHCP or BOOTP server, or can be entered manually and configured into the operating system at startup. DNS Global Settings This window is used to display and configure the global DNS settings. To view the following window, click Management > DNS > DNS Global Settings, as shown below: Figure 4-66 DNS Global Settings Window The fields that can be configured in DNS Global Settings are described below: 84
![](/manual_guide/products/dlink-dgs363028sc-web-ui-reference-guide-40c90d9/96.png)