D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 531

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Figure 9-84 Storm Control Window The fields that can be configured in Storm Control Trap Settings are described below: Parameter Trap State Description Select the storm control trap option here. Options to choose from are None, Storm Occur, Storm Clear, and Both. When None is selected, no traps will be sent. When Storm Occur is selected, a trap notification will be sent when a storm event is detected. When Storm Clear is selected, a trap notification will be sent when a storm event is cleared. Click the Apply button to accept the changes made. The fields that can be configured in Storm Control Polling Settings are described below: Parameter Interval Retries Description Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is 5 seconds. Enter the retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the Infinite option to disable this feature. Click the Apply button to accept the changes made. The fields that can be configured in Storm Control Port Settings are described below: Parameter Unit From Port - To Port Type Action Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the type of storm attack that will be controlled here. Options to choose from are Broadcast, Multicast, and Unicast. When the action is configured as the shutdown mode, the unicast refers to both known and unknown unicast packets; that is, if the known and unknown unicast packets hit the specified threshold, the port will be shutdown. Otherwise, unicast refers to unknown unicast packets. Select the action that will be taken here. Options to choose from are None, Shutdown, and Drop. Selecting None specifies not to filter the storm packets. Selecting Shutdown specifies to shut down the port when the value specified for 519