D-Link DGS-3630-52TC Web UI Reference Guide 2 - Page 339

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide Parameter Static Multicast Protocol Description Selecting this option specifies to display the multicast static routes. Select this option and then select the multicast protocol that will be used in this display here. Options to choose from are PIM-DM, PIM-SM, and DVMRP. • PIM-DM - Specifies to display only the PIM-DM routes. • PIM-SM - Specifies to display only the PIM-SM routes. • DVMRP - Specifies to display only the DVMRP routes. Group Address Source Address Select and enter the multicast group IP address here. Enter the multicast source IP address here. Click the Find button to locate a specific entry based on the information entered. Click the Show All button to display all the entries. IP Multicast RPF Table This window is used to display Reverse Path Forwarding (RPF) information for a given unicast host address. To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast RPF Table, as shown below: Figure 6-160 IP Multicast RPF Table Window The fields that can be configured are described below: Parameter IP Address Description Enter the unicast host IPv4 address here. Click the Find button to locate a specific entry based on the information entered. IP Multicast Forwarding Cache This window is used to display the content of the IP multicast routing forwarding cache database. To view the following window, click L3 Features > IP Multicast Routing Protocol > IPMC > IP Multicast Forwarding Cache, as shown below: Figure 6-161 IP Multicast Forwarding Cache Window 327