D-Link DGS-3630-52TC Quick installation Guide - Page 176
VLAN Mapping, L2 Features > VLAN Tunnel > VLAN Mapping
View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide VLAN Mapping This window is used to display and configure the VLAN mapping settings. If a profile is applied on an interface, the Switch matches the incoming packets according to the rules of the profile. If the packet matches a rule, the action of the rule will be taken. This action may be adding or replacing the outer-VID, specifying the priority of the new outerTAG or specifying the packet's new inner-VID. The match order depends on the rule's sequence number in the profile and stopped when first matched. If the sequence number is not specified, it will be allocated automatically. The sequence number begins from 10 and increments 10. Multiple different types of profiles can be configured on one interface. To view the following window, click L2 Features > VLAN Tunnel > VLAN Mapping, as shown below: Figure 5-44 VLAN Mapping Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Port Original VID List Original Inner VID Action Description Select the Switch unit ID that will be used here. Select the port range that will be used here. Select the port that will be used for the search here. Enter the original VLAN ID list here. The range is from 1 to 4094. Enter the original inner VLAN ID here. The range is from 1 to 4094. Select the action that will be taken here. Options to choose from are Translate and Dot1q-tunnel. • Translate - Specifies that the outer-VID will replace the outer-VID of the matched packets. • Dot1q-tunnel - Specifies that the outer-VID will be added for matched packets. VID Inner VID Priority Egress Priority Enter the VLAN ID here. The range is from 1 to 4094. Enter the inner VLAN ID here. The range is from 1 to 4094. Select the 802.1p priority value here. The range is from 0 to 7. A lower value has a higher priority. Select the egress C-tag priority for the VLAN tunnel interface here. Options to choose from are: • Copy - Specifies that a copy of the service VLAN priority is used. 164