D-Link DGS-3630-52TC Quick installation Guide - Page 369

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide BGP Network Settings This window is used to display and configure the BGP network settings. To view the following window, click L3 Features > BGP > BGP Network Settings, as shown below: Figure 6-163 BGP Network Settings Window The fields that can be configured are described below: Parameter Address Family Description Select the address family to use here. Options to choose from are: • IPv4 Unicast - Specifies to use IPv4 unicast address family here. • IPv4 VRF - Specifies to use the VRF instance here. Enter the name of the VRF instance in the space provided or click the Please Select button to select a pre-configured VRF instance that will be used here. This name can be up to 12 characters long. • IPv4 Multicast - Specifies to use IPv4 multicast address family here. • IPv6 Unicast - Specifies to use IPv6 unicast address family here. Network Address Route Map Name Enter the IPv4/IPv6 network address and mask that BGP will advertise here. Enter the route map name here. The configured network must be permitted by the specified route map to be advertised. This name can be up to 16 characters long. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Please Select button, the following page will appear. Figure 6-164 BGP Network Settings (Please Select) Window 357