D-Link DGS-3630-52TC Quick installation Guide - Page 446
Traffic Policy, Policy Map Name, Class Map Name, Apply, Delete, Set Action, Policer, Specify
View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide The fields that can be configured for Traffic Policy are described below: Parameter Policy Map Name Class Map Name Description Enter the policy map name here. This name can be up to 32 characters long. Enter the class map name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the Set Action button to configure the set action settings for the specified entry. Click the Policer button to configure the policer settings for the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Set Action button, the following page will appear. Figure 7-18 Policy Map (Set Action) Window The fields that can be configured are described below: Parameter None Specify New Precedence New DSCP New CoS New Cos Queue Description Select this option to specify that no action will be taken. Select this option to specify that action will be taken based on the configurations made. Select the new precedence value for the packet here. The range is from 0 to 7. Select the IPv4 only option to specify that IPv4 precedence will be marked only. If not selected, then both IPv4 and IPv6 precedence will be marked. For IPv6 packets, the precedence is the most three significant bits of the traffic class of the IPv6 header. Setting the precedence will not affect the CoS queue selection. Select the new DSCP value for the packet here. The range is from 0 to 63. Select the IPv4 only option to specify that the IPv4 DSCP will be marked only. If not selected, then both the IPv4 and IPv6 DSCP will be marked. Setting the DSCP will not affect the CoS queue selection. Select the new CoS value to the packet here. The range is from 0 to 7. Setting the CoS will not affect the CoS queue selection. Select the new CoS queue value to the packets here. This will overwrite the original CoS queue selection. Setting the CoS queue will not take effect if the policy map is applied for the egress flow on the interface. Click the Back button to return to the previous window. Click the Apply button to accept the changes made. 434