D-Link DGS-3630-52TC Quick installation Guide - Page 257

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IPv4 Static Route BFD, as shown below: Figure 6-22 IPv4 Static Route BFD Window The fields that can be configured are described below: Parameter Interface Name IP Address Description Enter the name of the interface that will be used to create the BFD session here. This name can be up to 12 characters long. Enter the IP address of the BFD peer here. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. IPv4 Route Table This window is used to display and configure the IPv4 route table settings. To view the following window, click L3 Features > IPv4 Route Table, as shown below: Figure 6-23 IPv4 Route Table Window The fields that can be configured are described below: Parameter VRF Name IP Address Network Address Description Enter the name of the VRF instance here. This name can be up to 12 characters long. Select and enter the single IPv4 address here. Select and enter the IPv4 network address here. In the first space enter the network prefix and in the second space enter the network mask. 245