D-Link DGS-3630-52TC Quick installation Guide - Page 26

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > Port Configuration > Jumbo Frame, as shown below: Figure 3-9 Jumbo Frame Window The fields that can be configured are described below: Parameter Unit From Port - To Port Maximum Receive Frame Size Description Select the stacking unit ID of the Switch that will be configured here. Select the appropriate port range used for the configuration here. Enter the maximum receive frame size value here. This value must be between 64 and 12288 bytes. By default, this value is 1536 bytes. Click the Apply button to accept the changes made. Interface Description This window is used to display the status, administrative status, and description of each port on the Switch. To view the following window, click System > Interface Description, as shown below: Figure 3-10 Interface Description Window Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 14