D-Link DGS-3630-52TC Quick installation Guide - Page 45

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide For example: • The PTP feature will function properly when the member ports receive and send PTP messages on the same stacked unit. • The PTP feature will not function properly when the member ports receive and send PTP messages on different stacked units. Therefore, it is recommended not to enable the PTP feature on a trunk group that exists in different stack units. PTP Port Global Settings This window is used to display and configure the PTP interface settings. To view the following window, click System > PTP (Precise Time Protocol) > PTP Port Global Settings, as shown below: Figure 3-30 PTP Port Global Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port State Description Select the Switch unit that will be used for this configuration here. Select the range of ports that will be used for this configuration here. Select to enable or disable the PTP feature on the port(s) specified here. Click the Apply button to accept the changes made. PTP Boundary Port Settings This window is used to display and configure the attributes of the PTP boundary clock. The configuration takes effect when the PTP device is of the 'boundary' type. 33