D-Link DI-614 Product Manual - Page 23

Home > LAN, Local Domain Name, Subnet Mask, IP Address, DNS Relay - receiver

Page 23 highlights

Using the Configuration Menu Home > LAN LAN is short for Local Area Network.This is considered your internal network.These are the IP settings of the LAN interface for the DI-614+. These settings may be referred to as Private settings.You may change the LAN IP address if needed.The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address Subnet Mask Local Domain Name The IP address of the LAN interface. The default IP address is: 192.168.0.1. The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0. (Optional) The name of your local domain. DNS Relay You may choose to enable or disable DNS Relay. If disabled, the DNS address received on the WAN port will pass through to the LAN clients. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

23
Home > LAN
Using the Configuration Menu
Local Domain Name
(Optional) The name of your local domain.
Subnet Mask
The subnet mask of the LAN interface.
The default subnet mask is
255.255.255.0
.
IP Address
The IP address of the LAN interface.
The default IP address is:
192.168.0.1
.
LAN
is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DI-614+.
These settings may be referred to
as Private settings. You may change the LAN IP address if needed. The LAN IP address
is private to your internal network and cannot be seen on the Internet.
DNS Relay
You may choose to enable or disable DNS Relay. If disabled,
the DNS address received on the WAN port will pass through
to the LAN clients.