D-Link DI-614 Product Manual - Page 34
Advanced > Performance, Beacon Interval, TX Rates, DTIM interval, Basic Rates, Preamble Type - + access point
View all D-Link DI-614 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Using the Configuration Menu Advanced > Performance Beacon Interval Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. DTIM interval (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Basic Rates Select the data rate. Default is 1-2-5.5-11-22Mbps. TX Rates Select the data rate. Default is 1-2-5.5-11-22Mbps. Preamble Type Long preamble is the default setting. (High traffic networks should use the shorter preamble type.) The preamble defines the length of the CRC block used in communication between the Access Point and the roaming wireless Network adapters.(Cyclic Redundancy Check is a common technique for detecting data transmission errors) 34