D-Link DI-804V Product Manual - Page 23

Filter Settings - LAN Filter Settings, LAN Side Filter Enabled: Enabled

Get D-Link DI-804V PDF manuals and user guides View all D-Link DI-804V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

For the SEND option choosing the proper protocol by which you transmit the data on the network. For the RECEIVE option choosing the proper protocol by which the VPN Internet Gateway receive the data on the network. Filter Settings - LAN Filter Settings LAN Filter Settings allow administrator to define whether local user has the permission to access Internet. To activate this feature, check LAN Side Filter Enabled. Then, you can define the filtering policy by entering an IP address range, network port number and select the protocol(s). For example, to prevent the local user of IP address range (from 192.168.0.100 to 192.168.0.200) to access port 80 (HTTP), the settings are as follows, LAN Side Filter Enabled: Enabled Default LAN Side Filter: Pass Filter: Block Protocol: TCP IP Address Range: 101 ~ 200 Destination Port Range: 80 ~ 80 (HTTP) 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
23
For the SEND option
choosing the proper protocol by which you transmit
the data on the network.
For the RECEIVE option
choosing the proper protocol by which the VPN
Internet Gateway receive the data on the network.
Filter Settings – LAN Filter Settings
LAN Filter Settings allow administrator to define whether local user has the
permission to access Internet. To activate this feature, check LAN Side Filter
Enabled. Then, you can define the filtering policy by entering an IP address
range, network port number and select the protocol(s).
For example, to prevent the local user of IP address range (from
192.168.0.100 to 192.168.0.200) to access port 80 (HTTP), the settings are as
follows,
LAN Side Filter Enabled: Enabled
Default LAN Side Filter: Pass
Filter: Block
Protocol: TCP
IP Address Range: 101 ~ 200
Destination Port Range:
80 ~ 80 (HTTP)