D-Link DI-804V Product Manual - Page 27
System Parameters, NOT PORT 80 - setup
![]() |
View all D-Link DI-804V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Note: Once HTTP port no (NOT PORT 80) is changed and the users of the LAN terminal want to configure the VPN Internet Gateway, the users have to type the VPN Internet Gateway LAN IP address with port number (http://192.168.0.1:1023). System Parameters System Parameters allows user to setup the MTU value (Maximum Transmission Unit). The default MTU value is 1500 Bytes. User can setup a proper MTU for your network device. For some areas, the ISPs set the limit packet size for PPPoE connection. User has to change MTU setting for surfing the net. 27
![](/manual_guide/products/dlink-di804v-product-manual-edf79c0/27.png)
27
Note:
Once HTTP port no (
NOT PORT 80
) is changed and the users of the
LAN terminal want to configure the VPN Internet Gateway, the users have to
type the VPN Internet Gateway LAN IP address with port number
(
)
.
System Parameters
System Parameters allows user to setup the MTU value (Maximum
Transmission Unit). The default MTU value is 1500 Bytes. User can setup a
proper MTU for your network device.
For some areas, the ISPs set the limit packet size for PPPoE connection. User
has to change MTU setting for surfing the net.