D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 371

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide is associated. Location The descriptive location configured for the managed AP. Radio Display the managed AP radio interface the client is associated to and its configured mode. VLAN If the client is on a VAP using VLAN data forwarding mode, the current assigned VLAN is displayed. Transmit Data Rate Display the rate at which the client station is currently transmitting data. Network Time Display the amount of time that has passed since this client first authenticated with the network. STBC Capable Display the Space Time Block Code (STBC) mode of the client. Detected IP Address Display the IPv4 address of the client. Click the drop-down menu to select a MAC address of the client to view detailed status information about the client and its association with the access point. Click the Disassociate to disassociate the client from the managed AP. After clicking the Client QoS tab under the Status tab, the following page will appear: Figure 2-36 Associated Clients Status - Client QoS window Click the drop-down menu to select the MAC address of the client with the information to view. The fields that can be displayed are described below: Parameter Description Actual / RADIUS Client QoS Operational Status Bandwidth Limit Down Click the Actual radio button to display either the actual status parameters configured on the AP. Click the RADIUS radio button to display any client QoS parameters that were obtained for the client from a RADIUS server when using 802.1X authentication. Display whether QoS is enforced for the client. Display the maximum rate at which the client receives traffic from the AP in bits per second. The rate shown in this field is the configured value rounded down to the nearest 64 366