Dacor ER30D Installation Instructions - Page 21
Cooktop Assembly
View all Dacor ER30D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installation Instructions Cooktop Assembly WARNING Never attempt to operate the range's cooktop with any of the burner rings, burner caps or grates removed. • Remove the burner rings, burner caps and grates from their shipping packages. • Install the burners as shown. • Gently set the grates on top of the spill tray. Put the legs of each grate inside the corresponding dimples. Crown burner Spill tray Stack burner STEP 3: Install burner cap. Ridge on cap must surround top of ring. Ridge on bottom of burner cap STEP 2: Install burner ring. Line up ring tabs with head slots. Twist back and forth to assure proper seating. Burner ring STEP 3: Install burner caps. Ridge on cap must surround top of ring. Ridge on bottom of burner cap STEP 1: Install burner head. Put locating tab in keyed hole. Burner head Keyed hole Burner base Crown Burner Installation STEP 2: Turn ring until it drops into place. Twist back and forth to assure proper seating. STEP 1: Put burner ring on top of head. Burner ring Burner head Stack Burner Installation 19