Dell 1135N Service Manual - Page 135
The cause and solutions of bad environment of the software - scanner install
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Alignment and Troubleshooting 4.2.5 The cause and solutions of bad environment of the software 1) The printer is not working (1) Description : While Power turned on, the printer is not working in the printing mode. 1. Check if the PC and the printer is properly connected and the toner cartridge installed. 2. Printing is not working in the Windows. 3. Check if the printer cable is directly connected to peripheral devices Replace the printer cable. If the problems not solved even after the cable replaced, check the amount of the remaining tone. (refer to Toner Cartridge Service 4-5) Check if the connection between PC and printer port is proper. If you using windows, check if the printer driver in the controller is set up. If the printer driver is properly set up, check in which program the printing is not working. The best way to find out is to open the memo pad to check the function of printing. If it is not working in a certain program, adjust the setup the program requires. Sometimes, the printout is normal within the Windows basic programs, but it's not working in a particular program. In such case, install the new driver again. If not working in the Windows basic program, Check the setup of the port of CMOS is on ECP. And check the address of IRQ 7 and 378 If the scanner needs to be connected to the printer, first the remove the scanner from the PC to see if the printer is properly working alone. Service Manual 4-62