Dell 2330d Service Manual - Page 74
Input tray tests, Duplex Feed 1, Feed Tests, Sensor Test
UPC - 884116003618
View all Dell 2330d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Duplex Feed 1 1. Select Duplex Feed 1 from the DUPLEX TESTS menu. The following will appear on the display: Duplex Feed 1 Feeding... 2. A blank page will feed through the printer. The following will appear on the display: Duplex Feed 1 Clear Paper... 3. Remove the blank page from the printer, and press to return to the DUPLEX TESTS menu. Input tray tests The INPUT TRAY TESTS setting is used to test the printer's installed input trays and their sensors. Feed Tests The Feed Test observes the paper path of media as it passes through the printer. This setting contains the following tests: • Tray 1 • Tray 2 • MP Feeder, if installed To observe the paper path, open the upper rear door during the feed test. Note: The upper front door cannot be opened during the feed test. The feed test can be performed by using media from any if the installed input sources. All pages used during this test drop into the default output bin. For each installed input source, press to select Single or press and to select Continuous. The Single test feeds one sheet of media to the default output bin. The Continuous test feeds media to the default output bin until is pressed. The operator panel displays [Select Input Tray] Feeding... while either of these tests perform. Sensor Test The Sensor Test verifies that the Tray 1, Tray 2, and MP Feeder (if installed) sensors are working correctly. Press to select this test from the INPUT TRAY TESTS menu. [Select Input Tray...] Tray Present will display on the operator panel. 3-10