Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 195

your Web browser. If you are a network administrator, you can clone the system settings of one printer to one or all printers on the network. Type your network printer IP address in your Web browser. Choose System Settings from the topics list, and then select the system settings you want to change. To copy your system settings to another printer on the network, choose Copy Printer Settings from the topics list, and then type the other printer's IP address. If you do not know your printer IP address, see the system settings page. To print a system settings page: 1. Press until >SETUP appears, and then press . 2. Press until >Reports appears, and then press . 3. System Settings is displayed. Press . The system settings page is printed. Resetting Defaults After executing this function and rebooting the multifunction printer, all the menu parameters, except the parameters for the network, are reset to their default values. 1. Press until >SETUP appears, and then press . 2. Press until >Admin Menu appears, and then press . 3. Press until >Maintenance appears, and then press . 4. Press until >Initialize NVM appears, and then press . 5. Press to select >User Section or >System Section, and then press . 6. The Are you sure? message appears on the operator panel. Press . 7. The multifunction printer is turned off automatically to apply the settings. Initializing NVRAM for Network Settings You can initialize the IP address and network-related settings by initializing NVRAM for Network settings. 1. Press until >SETUP appears, and then press . 2. Press until >Admin Menu appears, and then press . 3.