Dell 3115cn Color Laser Printer Dell 3115cn User's Guide - Page 399
Print Quality Problems, System Settings, Tray Settings
View all Dell 3115cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
Envelope misfeeds or multiple feeds occur. Page breaks in unexpected places. Job prints from the wrong source or on the wrong print media. Print media does not stack neatly in the output bin. Multifunction printer does not duplex pages. Ensure the width and length guides on the print media sources are adjusted correctly. Do not overfill the print media sources. Do not force print media into the multipurpose feeder when you load it; otherwise, it may skew or buckle. Remove any curled print media from sources. Load the recommended print side correctly for the type of print media you are using. See "Loading Print Media in Standard and Optional Trays" for more information. Turn the print media over or around and try printing again to see if feeding improves. Do not mix print media types. Do not mix reams of print media. Remove the top and bottom sheets of a ream before loading the print media. Load a print media source only when it is empty. Wipe the feeder rollers in the trays or multipurpose feeder with a cloth that slightly dampened with water. Reduce the number of envelopes in the stack. Check the Time-Out in the System Settings menu. Increase the setting. Check the Paper Type in the Tray Settings menu on the printer operator panel and in the printer driver. Turn the print media stack over in the tray or multipurpose feeder. Ensure 2 Sided is selected in both the PCL (Printer Control Language) menu on the printer operator panel and in the printer driver. Ensure you have enough print memory installed. Print Quality Problems Problem Print is too light. Action