Dell 3400MP Owner's Manual - Page 25

Problem (continued) The image is stretched when displaying a 16:9 DVD Image is reversed Lamp is burned out or makes a popping sound LAMP light is solid orange LAMP light is blinking orange TEMP light is solid orange TEMP light is blinking orange The remote control is not operating smoothly or in very limited range Possible Solution (continued) The projector automatically detects a 16:9 DVD and adjusts the aspect ratio to full screen with a 4:3 (letter-box) default setting. If the image is still stretched, adjust the aspect ratio as follows: • If you are playing a 16:9 DVD, select 4:3 aspect ratio type on your DVD player (if capable). • If you cannot select 4:3 aspect ratio type on your DVD player, select 4:3 aspect ratio in the Image Settings menu in the OSD. Select Management from the OSD and adjust the projection mode. When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector does not turn back on. To replace the lamp, see "Changing the Lamp" on page 26. If LAMP light is solid orange, replace the lamp. If the LAMP light is blinking orange, the lamp cover is not closed properly. Close the lamp cover properly. If the problem persists, contact Dell. The projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell. A projector fan has failed and the projector will automatically shut down. If the problem persists, contact Dell. The battery may be low. Check if the laser beam transmitted from the remote is too dim. If so, replace with 2 new AA batteries. Troubleshooting Your Projector 25