Dell 5200n Mono Laser Printer Dell™ Workgroup Laser Printer M5200 Us - Page 135
Prog System Code, Printing Font List
View all Dell 5200n Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Printing Font List The printer is processing or printing Wait for the message to clear. a list of all available fonts for the specified printer language. See also: Print Fonts Printing Menu Settings The printer is processing or printing Wait for the message to clear. the menu settings page. See also: Print Menus; Printing a menu settings page Prog System Code The printer is programming new DO NOT POWER system code. OFF Wait for the message to clear and the printer to reset. Do not turn the printer off while this message is displayed. Queuing and Deleting Jobs The printer is deleting one or more Wait for the message to clear. held jobs and sending one or more jobs to print. See also: Using the Print and Hold function Queuing Jobs Ready The printer is sending one or more Wait for the message to clear. held jobs to print. See also: Using the Print and Hold function The printer is ready to receive and Send a job to print. process print jobs. Ready Hex Reattach Remove Paper The printer is in Hex Trace mode and is ready to receive and process print jobs. The envelope feeder is either not fully connected to the printer or is experiencing a hardware failure. Send a job to print. All data sent to the printer is printed in hexadecimal and character representation. Control strings are printed, not executed. Turn the printer off and then on to exit Hex Trace mode and return to Ready status. Reestablish communication by removing the envelope feeder and reattaching it to the printer. Press Go to clear the message and continue printing without using the envelope feeder. In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the envelope feeder, and call Dell at support.dell.com. The output bin is full. See also: Contacting service Remove the stack of paper from the standard bin to clear the message. Res Reduced The printer is reducing the resolution of a page in the current job from 600 dots per inch (dpi) to 300 dpi to prevent a 38 Memory Full error. Res Reduced remains on the display while the job prints. Press Menu to open the Job Menu and cancel the current job.