Dell 5210n User's Guide - Page 33

Duplex in the Settings® Finishing Menu Use your software application or printer driver to send a Verify Print job. Duplex printing is available when you install an optional duplex unit. It lets you print on both sides of a sheet of paper. Lets you examine the first copy of a multiple-copy job to be sure it is satisfactory before you print the other copies. If the job is unsatisfactory, you can cancel the job. See Printing and Deleting Held jobs for more information about a Verify Print job. Replacing the Toner Cartridge The printer operator panel alerts you when the toner is low. You can still print for a short time while this message is displayed, but print quality begins to decrease as the toner level decreases. You can also view the toner level in the printer on the operator panel unless the printer is printing or in a busy state. To view the toner level: 1. Press the Down arrow button until appears next to Status/Supplies, and then press the Select button . 2. Press the Down arrow button until appears next to View Supplies, and then press the Select button . When the Toner low message appears or when you experience faded print, remove the toner cartridge. Thoroughly shake it side-to-side and front-to-back several times to redistribute the toner, reinsert it, and continue printing. Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the toner cartridge. To replace the toner cartridge: 1. Pull on the notch on the front of the printer to lower the multipurpose feeder. 2. Push the release latch to the right to open the top front cover.