Dell 926 All In One Inkjet Printer User's Guide - Page 89
Error, Error name, What it indicates, Solution, Power, Contact Customer Support
View all Dell 926 All In One Inkjet Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Error Error name: code: What it indicates: Solution: Error NVRAM R/W 0000 Error detected in reading from or writing to the NVRAM Press the Power button to reset the printer. Error Memory failure 0001 The printer is unable to initialize Press the Power button to reset memory. the printer. Error Hardware failure 0002 A general hardware failure has Press the Power button occurred, and the printer is the printer. unable to detect what part of the hardware system failed. to reset Error ROM checksum error 0003 A checksum error on the Read- Press the Power button to reset only memory has occurred. the printer. Error Paper Calibrate Fail 1003 The printer failed to initialize or Disconnect the printer power cable, calibrate the paper feed system. check for paper jams, and then reconnect the power cable. Error Flash Programming - out The printer is unable to program Press the Power button to reset 0200 of memory flash memory. the printer. Error 1201 Print Incomplete (Bad data to print head or more data expected for swath) The printer carrier stopped before a print job was completed. Press the Power button to reset the printer. Error Data Error 1202 Incorrect data has been sent from the computer to the printer. Press the Power button to reset the printer. Error Print Head Short 1203 A short circuit in the print head has occurred. Disconnect and then reconnect the printer power cable. Reinstall the ink cartridges. For more information, see Replacing Ink Cartridges. Error Mono TSR Error 1205 The printer cannot determine the temperature of the print head due to a problem in the mono TSR circuit. Reinstall the black ink cartridge. For more information, see Replacing Ink Cartridges. Error Color TSR Error 1206 The printer cannot determine the temperature of the print head due to a problem in the color TSR circuit. Reinstall the color ink cartridge. For more information, see Replacing Ink Cartridges. Error Paper system Error 1207 The paper system control failed. Press the Power button to reset the printer. Error Scan Carrier Stall 2200 The scan carrier stalled during a Turn off the printer, wait a few scan job. seconds, and then turn on the printer. NOTE: Contact Customer Support at www.support.dell.com if the errors are not resolved.