Dell Brocade 300 Web Tools Administrator's Guide v7.1.0 - Page 89
Ports Explorer tree, Button area, Subtabs, Data L2COS Value - 24 port
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Port management overview 5 • MTU Size • Compression Mode • Data L2COS Value • DSCP Data • IKE Policy Number • IPsec Policy Enabled • Keep Alive Timeout • MaximumCommunicationRate • MinimumCommunicationRate • MaxRetransmitRate • MinRetransmitRate • Metric • Pre-Shared key • QOS Mapping • Selective Ack Ports Explorer tree The Ports Explorer tree displays on the left side of the window. Items in the tree are displayed as follows: • Switches-Switch ID, with switch name in parentheses; for example, 3(MapsSW_202) • Blades-Slot number of the blade, with blade ID in parentheses; for example, Slot 7(24) • Ports-Port number; for example, Port 2 • 10G SFP ports- A yellow triangle badge displays to visually distinguish the 10G SFP+ ports. Button area The button area contains buttons for all the tasks you can perform on the selected port. If you select more than one port, buttons are available for only the tasks that you can perform on all of the selected ports. Buttons are grayed (unavailable) if they are not applicable to the selected ports. Port information displays in either a table of ports or information about a specific port, depending on your selection. If you select a slot or switch, the system displays a table of all the ports for the slot or switch. If you select a port, the system displays detailed information about the port. Subtabs You can view either Basic Mode or Advanced Mode, and to view the subtabs that contain additional information about the port. The available subtabs depend on the type of port selected. To view basic mode, select View > Basic. When viewing detailed information about a port, Basic Mode provides these subtabs: Web Tools Administrator's Guide 61 53-1002756-01