Dell Brocade 6505 Brocade 6505 Hardware Reference Manual - Page 32

3 LED activity interpretation Figure 4 shows the LEDs on the nonport side of the switch. 1 1 Power supply and fan assembly #1 status LED FIGURE 4 LEDs on the nonport side of Brocade 6505 LED patterns Table 1 describes the port side LEDs and their behavior. TABLE 1 Port side LED patterns during normal operation LED name LED color Status of hardware Recommended action Power Status No light (green) Steady green System Status (bicolor) No light Steady green Steady amber (for more than five seconds) System is off or there is an internal power supply failure. Verify the system is powered on (power supply switches to I), the power cables are attached, and your power source is live. Otherwise, contact your switch service provider. System is on and power supplies No action required. are functioning properly. System is off or there is no power. Verify the system is on and has completed booting. System is on and functioning properly. No action required. A system fault has occurred. This LED displays steady amber during POST; this is normal and does not indicate a fault. Check the failure indicated on the system console. Contact your switch service provider. Blinking amber Ethernet Speed (green) Ethernet Activity/Link (amber) No light Steady green No light Steady amber Blinking amber Attention is required. A number of factors can cause this status, including a single power supply failure, a fan failure, or one or more environmental ranges has been exceeded. Check the management interface and the error log for details on the cause of status. Contact your switch service provider. Port speed is 10 Mbps. No action required. Port speed is 100 Mbps. No action required. There is no link. Verify that the Ethernet cable is connected correctly. There is a link. No action required. There is link activity (traffic). No action required. 20 Brocade 6505 Hardware Reference Manual 53-1002449-01