Dell Brocade 6505 Brocade 6505 Hardware Reference Manual - Page 47

General specifications, Data transmission ranges

Page 47 highlights

General specifications A TABLE 8 Condition Environmental requirements (Continued) Acceptable during operation Altitude Shock 0 to 3 km (9,842 feet) above sea level 20 G, 6 ms, half-sine wave Vibration 0.5 G sine, 0.4 gms random, 5-500 Hz Airflow Heat dissipation Maximum - 71.36 cmh (42 cfm)??? Nominal - 59.47 cmh (35 cfm)??? NOTE: Airflow is port side exhaust. 338 BTU/hr (24 port configuration) Acceptable during nonoperation 0 to 12 km (39,370 feet) above sea level 33 G, 11 ms, half-sine wave, 3/eg Axis 2.0 G sine, 1.1 gms random, 5-500 Hz N/A N/A General specifications Table 9 lists the general specifications for the Brocade 6505. TABLE 9 General specifications Specification Description Configurable port types System architecture System processor ANSI Fibre Channel protocol Modes of operation Fabric initialization FC-IP (IP-over-Fibre Channel) Aggregate switch I/O bandwidth FC Port-to-port latency Switching capacity F_Port, E_Port, M_Port, EX_Port, D_Port Nonblocking shared-memory switch PowerPC 440EPx @ 667 MHz FC-PH (Fibre Channel Physical and Signalling Interface standard) Fibre Channel Class 2 and Class 3 Complies with FC-SW-3 Rev. 6.6 Complies with FC-IP 2.3 of FCA profile 384 Gbps 800 nanoseconds with no contention (destination port is free) An aggregate switching capacity of 210??? million frames per second (for Class 2, Class 3, and Class F frames for the 24 port chassis) Data transmission ranges Table 10 provides the data transmission ranges for different transceivers, port speeds, and cable types. TABLE 10 Supported optics, speeds, cables, and distances Transceiver Form factor type Speed Multimode media Multimode media (62.5 microns) (50 microns) (OM1) (OM2) SWL SFP+ SFP+ SFP+ 4 Gbps 70 m (229 ft.) 8 Gbps 21 m (68 ft.) 16 Gbps 15 m (49 ft.) 150 m (492 ft.) 50 m (164 ft.) 35 m (115 ft.) Multimode media (50 microns) (OM3) Multimode media (50 microns) (OM4) 380 m (1264 ft.) 150 m (492 ft.) 100 m (328ft.) 400 m (1312 ft.) 150 m (492 ft.) 125 m (410 ft.) Single mode media (9 microns) N/A N/A N/A Brocade 6505 Hardware Reference Manual 35 53-1002449-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

Brocade 6505 Hardware Reference Manual
35
53-1002449-01
General specifications
A
General specifications
Table 9
lists the general specifications for the Brocade 6505.
Data transmission ranges
Table 10
provides the data transmission ranges for different transceivers, port speeds, and cable
types.
Altitude
0 to 3 km (9,842 feet) above sea level
0 to 12 km (39,370 feet) above sea level
Shock
20 G, 6 ms, half-sine wave
33 G, 11 ms, half-sine wave, 3/eg Axis
Vibration
0.5 G sine, 0.4 gms random, 5-500 Hz
2.0 G sine, 1.1 gms random, 5-500 Hz
Airflow
Maximum - 71.36 cmh (42 cfm)???
Nominal - 59.47 cmh (35 cfm)???
NOTE: Airflow is port side exhaust.
N/A
Heat dissipation
338 BTU/hr (24 port configuration)
N/A
TABLE 8
Environmental requirements (Continued)
Condition
Acceptable during operation
Acceptable during nonoperation
TABLE 9
General specifications
Specification
Description
Configurable port types
F_Port, E_Port, M_Port, EX_Port, D_Port
System architecture
Nonblocking shared-memory switch
System processor
PowerPC 440EPx @ 667 MHz
ANSI Fibre Channel protocol
FC-PH (Fibre Channel Physical and Signalling Interface standard)
Modes of operation
Fibre Channel Class 2 and Class 3
Fabric initialization
Complies with FC-SW-3 Rev. 6.6
FC-IP (IP-over-Fibre Channel)
Complies with FC-IP 2.3 of FCA profile
Aggregate switch I/O bandwidth
384 Gbps
FC Port-to-port latency
800 nanoseconds with no contention (destination port is free)
Switching capacity
An aggregate switching capacity of 210??? million frames per second (for
Class 2, Class 3, and Class F frames for the 24 port chassis)
TABLE 10
Supported optics, speeds, cables, and distances
Transceiver
type
Form factor
Speed
Multimode media
(62.5 microns)
(OM1)
Multimode media
(50 microns)
(OM2)
Multimode media
(50 microns)
(OM3)
Multimode media
(50 microns)
(OM4)
Single mode media
(9 microns)
SWL
SFP+
4 Gbps
70 m (229 ft.)
150 m (492 ft.)
380 m (1264 ft.)
400 m (1312 ft.)
N/A
SFP+
8 Gbps
21 m (68 ft.)
50 m (164 ft.)
150 m (492 ft.)
150 m (492 ft.)
N/A
SFP+
16 Gbps
15 m (49 ft.)
35 m (115 ft.)
100 m (328ft.)
125 m (410 ft.)
N/A