Dell Brocade 6505 Brocade 6505 Hardware Reference Manual - Page 46

System power specifications, Environmental requirements

Get Dell Brocade 6505 PDF manuals and user guides View all Dell Brocade 6505 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

A System power specifications .TABLE 6 Facility requirements Type Requirements Electrical Thermal Cabinet (when rack-mounted) • Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the switch nameplate. • Circuit protected by a circuit breaker and grounded in accordance with local electrical codes. Refer to Table 7 on page 34 for complete power supply specifications. • A minimum airflow of 79.8 cubic meters/hour (47 cubic ft/min.) available in the immediate vicinity of the switch.??? • Ambient air temperature not exceeding 40°C (104°F) while the switch is operating. • One rack unit (1U) in a 48.3 cm (19-inch) cabinet. • All equipment in cabinet grounded through a reliable branch circuit connection. • Additional weight of switch not to exceed the cabinet's weight limits. • Cabinet secured to ensure stability in case of unexpected movement. System power specifications The power supplies are universal and capable of functioning worldwide without voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of accommodating input voltages and line frequencies. Each power supply has built-in fans for cooling. Table 7 lists the system power specifications for the Brocade 6505. TABLE 7 System power specifications Specification Value Maximum output (per power supply) AC input power draw AC input voltage AC input line frequency AC inrush current Input line protection 150 watts, 12 VDC Idle, no optics: 60 W Maximum, fully populated with 16 Gbps SWL optics: 80 W 85-264 VAC, nominal 100-240 VAC 47-63 Hz, nominal 50-60 Hz Maximum of 35A @ 240 VAC for 10 ms or less AC lines are fused. Environmental requirements Table 8 lists the acceptable environmental ranges for both operating and nonoperating (such as during transportation or storage) conditions. TABLE 8 Environmental requirements Condition Acceptable during operation Acceptable during nonoperation Ambient Temperature Humidity 0º to 40ºC (32º to 104ºF) 10% to 85% RH non-condensing, at 40ºC (104ºF) -25º to 70ºC (-13º to 158ºF) 10% to 90% RH non-condensing, at 70ºC (158ºF) 34 Brocade 6505 Hardware Reference Manual 53-1002449-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
34
Brocade 6505 Hardware Reference Manual
53-1002449-01
System power specifications
A
.
System power specifications
The power supplies are universal and capable of functioning worldwide without voltage jumpers or
switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply has built-in fans for
cooling.
Table 7
lists the system power specifications for the Brocade 6505.
Environmental requirements
Table 8
lists the acceptable environmental ranges for both operating and nonoperating (such as
during transportation or storage) conditions.
TABLE 6
Facility requirements
Type
Requirements
Electrical
•
Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating
on the switch nameplate.
•
Circuit protected by a circuit breaker and grounded in accordance with local electrical
codes.
Refer to
Table 7 on page 34
for complete power supply specifications.
Thermal
•
A minimum airflow of 79.8 cubic meters/hour (47 cubic ft/min.) available in the
immediate vicinity of the switch.???
•
Ambient air temperature not exceeding 40
°
C (104
°
F) while the switch is operating.
Cabinet (when
rack-mounted)
•
One rack unit (1U) in a 48.3 cm (19-inch) cabinet.
•
All equipment in cabinet grounded through a reliable branch circuit connection.
•
Additional weight of switch not to exceed the cabinet’s weight limits.
•
Cabinet secured to ensure stability in case of unexpected movement.
TABLE 7
System power specifications
Specification
Value
Maximum output (per power supply)
150 watts, 12 VDC
AC input power draw
Idle, no optics: 60 W
Maximum, fully populated with 16 Gbps SWL optics: 80 W
AC input voltage
85-264 VAC, nominal 100-240 VAC
AC input line frequency
47-63 Hz, nominal 50-60 Hz
AC inrush current
Maximum of 35A @ 240 VAC for 10 ms or less
Input line protection
AC lines are fused.
TABLE 8
Environmental requirements
Condition
Acceptable during operation
Acceptable during nonoperation
Ambient
Temperature
0º to 40ºC (32º to 104ºF)
-25º to 70ºC (-13º to 158ºF)
Humidity
10% to 85% RH non-condensing, at
40ºC (104ºF)
10% to 90% RH non-condensing, at 70ºC
(158ºF)