Dell Brocade 6505 Brocade 6505 Hardware Reference Manual - Page 43

Replacing a power supply and fan assembly

Get Dell Brocade 6505 PDF manuals and user guides View all Dell Brocade 6505 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Removing and replacing a power supply and fan assembly 4 1 2 3 4 1 Brocade 6505 chassis 2 Power supply and fan assembly 3 Captive screw 4 Product labels FIGURE 8 Inserting the power supply and fan assembly into the switch Replacing a power supply and fan assembly Refer to Figure 8 for this procedure. Complete the following steps to replace a combined power supply and fan assembly in a Brocade 6505. CAUTION The power supply switch must be in the off position (on/off sawitch switched to the O symbol( when inserting it in the chassis. Damage to the switch could result if a live power supply is installed. 1. Ensure that the new power supply and fan assembly has the same part number as the power supply and fan assembly being replaced. 2. Orient the new power supply and fan assembly with the captive screw on the right, as shown in Figure 8. CAUTION Do not force the installation. If the FRU does not slide in easily, ensure that it is correctly oriented before continuing. Brocade 6505 Hardware Reference Manual 31 53-1002449-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Brocade 6505 Hardware Reference Manual
31
53-1002449-01
Removing and replacing a power supply and fan assembly
4
FIGURE 8
Inserting the power supply and fan assembly into the switch
Replacing a power supply and fan assembly
Refer to
Figure 8
for this procedure.
Complete the following steps to replace a combined power supply and fan assembly in a Brocade
6505.
CAUTION
The power supply switch must be in the off position (on/off sawitch switched to the
O
symbol(
when inserting it in the chassis. Damage to the switch could result if a live power supply is
installed.
1.
Ensure that the new power supply and fan assembly has the same part number as the power
supply and fan assembly being replaced.
2.
Orient the new power supply and fan assembly with the captive screw on the right, as shown in
Figure 8
.
CAUTION
Do not force the installation. If the FRU does not slide in easily, ensure that it is correctly oriented
before continuing.
1
Brocade 6505 chassis
3
Captive screw
2
Power supply and fan assembly
4
Product labels
1
3
4
2