Dell Brocade Adapters Brocade Adapters Troubleshooting Guide - Page 108
Remote port statistics, Displaying target statistics through HCM
View all Dell Brocade Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
3 Statistics 3. Select the type of statistics that you want to run from the Statistics Name list. 4. Select the polling interval. 5. Click Apply to save your changes. To display the Historical Performance dialog box and graphs for a port, use the following steps. 1. Select a device for which you want to generate a historical performance graph. 2. Select Monitor > Performance. 3. Select the Enable Historical Data Collection check box to display the Historical Performance dialog box. 4. Select the type of statistics that you want to run from the Statistics Name list. 5. Click Apply to save your changes. Remote port statistics Remote port statistics can help isolate end-to-end login problems. Use HCM and BCU to display statistics for the following: • Port login (PLOGI) activity • Authentication and discovery (ADISC) activity • Logout (LOGO) activity • RCSNs received • Process logins (PRLI) received • Hardware abstraction layer (HAL) activity • Remote port speed capability (RPSC) As an example of using these statistics for troubleshooting, if the host cannot see the target, you can verify that the remote port (rport) is reporting itself online by comparing the rport offline and rport online statistics. The rport online counter should be one greater than the rport offline counter. If not, clear the counters and retry connecting to the remote port. Verify the rport online and rport offline statistics again. Displaying target statistics through HCM Launch the Target Statistics dialog box using the following steps to display target statistics. 1. Launch the HCM. 2. Select the base adapter port from the device tree window. 3. Click Monitor > Statistics > Remote Port Statistics > Target Statistics. 84 Brocade Adapters Troubleshooting Guide 53-1002145-01