Dell Brocade Adapters Brocade Adapters Troubleshooting Guide - Page 121
Collecting BIOS data, Displaying BIOS data through BCU, Collecting LLDP data (CNA)
View all Dell Brocade Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Collecting BIOS data 3 Collecting BIOS data Collect information on the currently configured BIOS and boot over SAN configuration using the BCU and HCM. Displaying BIOS data through BCU Use the bios --query BCU command to display such information as the boot over SAN enabled or disabled state, port speed, boot LUNs obtained from flash, and boot LUNs obtained from the fabric (only if automatic discovery of boot LUNs from the fabric is enabled). Any "Preboot" output means that parameters were configured using a blade system management application. Preboot configuration data can include port speed, BIOS (boot over SAN) state, and configured boot LUN identification. Preboot data can also include the FCoE MAC, WWN, and VLAN and Ethernet MAC and VLAN information. bios --query where: port_id The ID of the port for which you want to display the data. This could be the PWWN, port hardware path, or user-specified port name. This could also be the adapter-index/port-index. For example, to specify adapter 1, port 1 you would use 1/1 as the port identification. Display BIOS data through HCM Display current BIOS information through the HCM Boot over SAN dialog box. Information includes BIOS (boot over SAN) enabled or disabled state, port speed, boot option, preboot BIOS enable and port speed, and details on current boot LUNs. To access this dialog box, use the following steps. 1. Select a host, an adapter, or an adapter's physical port from the HCM device tree. 2. Select Configure > Basic Port Configuration. The Basic Port Configuration dialog box displays. 3. Click the Boot-over-SAN tab. The Boot over SAN dialog box displays. Collecting LLDP data (CNA) Collect information on the Link Layer Discovery Protocol (LLDP) associated with a specific CNA or a Fabric Adapter port configured in CNA mode using the HCM LLDP Properties panel. The LLDP Properties panel displays information such as the MAC address of the local system, LLDP operational status, system management address, user-configured port description, port identification, configured name of local system, system capabilities based on system model, and time to live (TTL) values in LLDP frames. To collect LLDP data, perform the following steps. 1. Select a CNA or Fabric Adapter in the device tree. 2. Click the LLDP tab in the right pane. Brocade Adapters Troubleshooting Guide 97 53-1002145-01