Dell Brocade Adapters Brocade Adapters Troubleshooting Guide - Page 79
Troubleshooting mezzanine card problems
View all Dell Brocade Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Troubleshooting mezzanine card problems 2 • cat /proc/vmware/version This displays the latest versions of installed drivers. For storage drivers look for a bfa entry and related build number. For network drivers, look for a bna entry and related build number. • rpm -qa|grep -i bfa This command prints the names of the Brocade adapter storage driver package (bfa) if installed. • rpm -qa|grep -i bna This command prints the names of the Brocade adapter network driver package (bna) if installed. • lspci This utility displays information about all PCI buses in the system and all devices connected to them. Brocade Communications Fibre Channel displays for an HBA or Fabric Adapter port configured in HBA mode. Brocade Communications Fibre Channel and Ethernet Controller display for a CNA or Fabric Adapter port configured in CNA or NIC mode if driver packages have correctly loaded. Troubleshooting mezzanine card problems As mezzanine or expansion card adapters are installed in blade servers as part of a blade system enclosure, problems may occur for different reasons than when adapters are installed in standard host systems. This section outlines some general methods for isolating causes of problems with card operation. For more information, please see troubleshooting and maintenance information published for your specific blade server, server blade, and blade system enclosure. Also, refer to the support location on the manufacturer's website for your blade server and blade system enclosure. If problems exist with adapter operation on a blade server, verify the following: • The blade server is turned on. • The adapter is installed in the appropriate connector on the blade server. On some blade servers, connectors may only support a specific adapter type. Refer to your blade sever documentation for help. • The blade system enclosure is configured for adapter operation. Refer to your blade system enclosure and documentation for blade system enclosure components for help. • The blade server on which the adapter is installed is correctly configured for adapter operation and is correctly installed in the blade system enclosure. Refer to your blade server and blade system enclosure documentation for help. • All modules or blades in that support adapter operation are installed in the appropriate enclosure bays and correctly configured. Refer to the documentation for your blade system enclosure for help. • You are using the latest device drivers, firmware, and BIOS for the blade server and other components in the blade system enclosure that support adapter operation. Brocade Adapters Troubleshooting Guide 55 53-1002145-01