Dell C3765dnf Dell Multifunction Color Laser Printer Users Guide - Page 166

DRPD Pattern Receive Mode Ring Tone Volume Auto Receive Fax Auto Receive Tel/Fax Auto Receive Answer/Fax Junk Fax Setup Sent Fax Forward Forwarding Number Forwarding E-mail Address 1 Forwarding E-mail Address 2 Forwarding E-mail Address 3 Forwarding E-mail Address 4 Forwarding E-mail Address 5 2 Sided Printing Remote Receive Remote Receive Tone Discard Size Sets the Distinctive Ring Pattern Detection (DRPD) setting from Pattern1 to Pattern7. DRPD is a service provided by some telephone companies. Fax* Automatically receives faxes. Telephone Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external telephone and then pressing a remote receive code, or by selecting Manual Receive in On Hook and then pressing the (Start) button. For details about Manual Receive, see "Receiving a Fax Manually in the Telephone Mode." Telephone/Fax When the printer receives an incoming fax, the external telephone rings for the time specified in Auto Receive Tel/Fax, and then the printer automatically receives a fax. If an incoming call is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call. Ans Machine/Fax The printer can share a telephone line with an answering machine. In this mode, the printer will monitor the fax signal and pick up the line if there are fax tones. If the telephone communication in your country is serial, this mode is not supported. DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive ring service must be installed on your telephone line by the telephone company. After the telephone company has provided a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for that specific ring pattern. Sets the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive Mode is set to Telephone/Fax. Sets the interval at which the printer goes into the fax receive mode after answering an incoming call. Sets the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call. Sets the interval at which the printer goes into the fax receive mode after the external answering machine receives an incoming call. Sets whether to reject unwanted faxes by accepting only the faxes from the numbers registered in the Phone Book Sets whether to forward incoming faxes to a specified destination. Allows you to enter the fax number of the destination to which incoming faxes will be forwarded. Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Allows you to enter the e-mail address to which incoming faxes are to be forwarded. Sets whether to print on both sides of a sheet of paper. Sets whether to receive a fax by pressing a remote receive code on the external telephone. Sets a 2-digit remote receive code when Remote Receive is On. Sets whether to delete text or images at the bottom of a fax page when the entire page does not fit onto the output paper. Selecting Auto Reduction automatically reduces the fax page to fit it onto the output paper, and does not discard any images or text at the bottom of the page. 164 Dell™ Printer Configuration Web Tool